opportunistic-xbee/libraries/XBee/examples/Series1_IoSamples/Series1_IoSamples.pde

/**
 * Copyright (c) 2009 Andrew Rapp. All rights reserved.
 *
 * This file is part of XBee-Arduino.
 *
 * XBee-Arduino is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * XBee-Arduino is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with XBee-Arduino.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <XBee.h>
#include <NewSoftSerial.h>

/*
This example is for Series 1 XBee Radios only
Receives I/O samples from a remote radio with 16-bit addressing.
The remote radio must have IR > 0, at least one digital or analog input enabled
and DL set to the 16-bit address of the receiving XBee (the one connected to the Arduino).
 
This example uses the NewSoftSerial library to view the XBee communication.  I am using a 
Modern Device USB BUB board (http://moderndevice.com/connect) and viewing the output
with the Arduino Serial Monitor.    
You can obtain the NewSoftSerial library here http://arduiniana.org/libraries/NewSoftSerial/
*/

// Define NewSoftSerial TX/RX pins
// Connect Arduino pin 9 to TX of usb-serial device
uint8_t ssRX = 9;
// Connect Arduino pin 10 to RX of usb-serial device
uint8_t ssTX = 10;
// Remember to connect all devices to a common Ground: XBee, Arduino and USB-Serial device
NewSoftSerial nss(ssRX, ssTX);

XBee xbee = XBee();

Rx16IoSampleResponse ioSample = Rx16IoSampleResponse();
// 64-bit response is same except api id equals RX_64_IO_RESPONSE and returns a 64-bit address
//Rx64IoSampleResponse ioSample = Rx64IoSampleResponse();

void setup() { 
  xbee.begin(9600);
  // start soft serial
  nss.begin(9600);
}

void loop() {
  //attempt to read a packet    
  xbee.readPacket();

  if (xbee.getResponse().isAvailable()) {
    // got something

    if (xbee.getResponse().getApiId() == RX_16_IO_RESPONSE) {
      xbee.getResponse().getRx16IoSampleResponse(ioSample);

      nss.print("Received I/O Sample from: ");
      nss.println(ioSample.getRemoteAddress16(), HEX);  

      nss.print("Sample size is ");
      nss.println(ioSample.getSampleSize(), DEC);

      if (ioSample.containsAnalog()) {
        nss.println("Sample contains analog data");
      }

      if (ioSample.containsDigital()) {
        nss.println("Sample contains digtal data");
      }
      
      for (int k = 0; k < ioSample.getSampleSize(); k++) {
        nss.print("Sample "); 
        nss.print(k + 1, DEC);   
        nss.println(":");    
        
        for (int i = 0; i <= 5; i++) {
          if (ioSample.isAnalogEnabled(i)) {
            nss.print("Analog (AI");
            nss.print(i, DEC);
            nss.print(") is ");
            nss.println(ioSample.getAnalog(i, k));  
          }
        }
        
        for (int i = 0; i <= 8; i++) {
           if (ioSample.isDigitalEnabled(i)) {
            nss.print("Digtal (DI");
            nss.print(i, DEC);
            nss.print(") is ");
            nss.println(ioSample.isDigitalOn(i, k));
          }
        }
      }
    } 
    else {
      nss.print("Expected I/O Sample, but got ");
      nss.print(xbee.getResponse().getApiId(), HEX);
    }    
  } 
  else if (xbee.getResponse().isError()) {
    nss.print("Error reading packet.  Error code: ");  
    nss.println(xbee.getResponse().getErrorCode());
  }
}