diff --git a/launch b/launch
deleted file mode 100755
index 7b82717..0000000
--- a/launch
+++ /dev/null
@@ -1,159 +0,0 @@
-#!/bin/bash
-
-
-# (1) Primary setup
-#--------------------------------------------------------#
-# (1) Get current ABS directory
-ROOT=$(dirname `realpath $0`);
-
-# (2) Check required arguments
-test $# -lt 4 && echo -e "ERR: Missing arguments\n\nARGUMENTS:\n\tname\t\tThe name of the machine\n\ttarget_host\tThe hostname (or ip) of the target\n\tout_port\tThe port you want to use to send\n\tin_port\t\tThe port the peer uses to listen\n\ttrigger_port\tOptional param. Used to trigger the peer connection\n" && exit 1;
-
-# (3) Manage optional param #
-TRIGGER="";
-test $# -ge 5 && TRIGGER="$5";
-
-
-# (2) Secondary setup
-#--------------------------------------------------------#
-# (1) Create config dir (if doesn't exist) #
-test ! -d $ROOT/config && mkdir $ROOT/config;
-
-# (2) Reset configuration file (if exists)
-CONF_FILE=$ROOT/config/$1;
-test -f $CONF_FILE && rm $CONF_FILE;
-
-# (3) Create buffer paths
-BUF_IN="/tmp/buf_in_$1";
-BUF_OUT="/tmp/buf_out_$1";
-
-# (4) Flush buffers
-echo -ne "" > $BUF_IN;
-echo -ne "" > $BUF_OUT;
-
-
-# (3) Launch INPUT server
-#--------------------------------------------------------#
-# (1) Start the script in background
-(
-
-	trap "echo 'launch.server.killed'; kill -9 %1 2>/dev/null && echo 'launch.server.nc.killed';" INT KILL;
-
-	infail=0;
-
-	# kill script after 10 failures
-	while [ $infail -lt 10 ]; do
-
-		# main command
-		echo "(.) started [input]";
-		( nc -lp $4 >> $BUF_IN 2> /dev/null && infail=0 || ( infail=`expr $infail + 1`; exit 1 ) || echo "Port $4 already in use" ) &
-		wait $!;
-
-		# try to kill proccess that uses port if failed and such proccess exists
-		if [ $infail -eq 0 ]; then
-			echo "    > END [input]";
-		else
-			echo "    > FAIL [input]";
-			LISTEN_PID=`lsof -n -i4TCP:$4 | grep LISTEN | awk '{print $2}'`;
-			test ! -z "$LISTEN_PID" && kill -9 $LISTEN_PID 2>/dev/null;
-		fi;
-
-	done;
-
-)&
-
-# (2) Store the background proccess PID #
-IN_PID=$!;
-
-
-
-
-
-################################
-# IF SET, SEND TRIGGER TO PEER #
-################################
-test ! -z "$TRIGGER" && ( echo "(.) sending [trigger:$2:$TRIGGER]"; bash -c "exec 3<>/dev/tcp/$2/$TRIGGER" && echo "    > SENT [trigger:$2:$TRIGGER]" || echo "    > ERR [trigger:$2:$TRIGGER]" )
-
-##################################
-# WAIT 2s FOR THE PEER TO LISTEN #
-##################################
-sleep 2;
-
-
-
-
-
-# (4) Launch OUTPUT client
-#--------------------------------------------------------#
-# (1) Start the script in background
-(
-
-	trap "echo 'launch.client.killed'; kill -9 %1 2>/dev/null && echo 'launch.client.nc.killed';" INT KILL;
-
-	outfail=0;
-
-	# stop after 5 failed attempts
-	while [ $outfail -lt 5 ]; do
-
-		# main command
-		echo "(.) started [output]";
-		( tail -f $BUF_OUT | nc $2 $3 2>/dev/null && outfail=0 || ( outfail=`expr $outfail + 1`; exit 1 ) || echo "Cannot connect to $2:$3"  ) &
-		wait $!;
-
-		test $outfail -eq 0 && echo "    > END [output]" || echo "    > FAIL [output]";
-
-		sleep 1; # can sleep because the buffer is never flushed
-
-	done;
-
-)&
-
-# (2) Store the background proccess PID #
-OUT_PID=$!;
-
-
-
-# (5) Store the config file for 'write' + 'send' to work properly
-#--------------------------------------------------------#
-# (1) Store config file in 'config/$NAME'
-echo -e "#!/bin/bash\nBUF_IN=\"$BUF_IN\"; BUF_OUT=\"$BUF_OUT\";\nIN_PID=$IN_PID; OUT_PID=$OUT_PID;\n" > $CONF_FILE;
-
-# (2) Notify server started #
-
-
-
-# (6) Manage ending proccess
-#--------------------------------------------------------#
-# (1) Kill subproccesses if Ctrl+C #
-on_exit(){
-	echo "launch.kill";
-
-	## {1} Kill client ##
-	echo 'launch.client.kill';
-	kill -9 $OUT_PID 2>/dev/null;
-
-	## {2} Kill server ##
-	echo 'launch.server.kill';
-	kill -9 $IN_PID  2>/dev/null;
-
-	## {3} Remove config file ##
-	echo 'launch.config.delete';
-	rm $CONF_FILE  2>/dev/null;
-
-	## {4} Remove buffers ##
-	echo 'launch.buffer.in.delete';
-	echo 'launch.buffer.out.delete';
-	rm $BUF_OUT $BUF_IN 2>/dev/null;
-
-	exit 0;
-}
-
-# (2) Setup trap for signals INT + KILL #
-trap "on_exit" INT KILL;
-
-# (2) Wait for daemons to stop #
-wait $OUT_PID;
-wait $IN_PID;
-
-on_exit;
-
diff --git a/read b/read
index 78eb45e..3b5d4c3 100755
--- a/read
+++ b/read
@@ -4,17 +4,17 @@
 ROOT=$(dirname `realpath $0`);
 
 # (1) Check arguments
-test $# -lt 1 && echo "ERR: Missing arguments (name)" && exit 1;
+test $# -lt 1 && echo "ERR: Missing arguments (id)" && exit 1;
 
 # (2) Manage optional argument #
 FLUSH=1;
 test $# -ge 2 -a "$2" = "-" && FLUSH=0;
 
 # (2) load configuration file
-test -f $ROOT/config/$1 && source $ROOT/config/$1 || ( echo "ERR: No such name" && exit 1 ) || exit 1;
+test -f /tmp/inbuf_$1 || ( echo "ERR: No such id" && exit 1 ) || exit 1;
 
 # (3) Read content from file
-cat $BUF_IN;
+cat /tmp/inbuf_$1;
 
 # (4) Flush buffer
-test $FLUSH -eq 1 && echo -ne "" > $BUF_IN;
+test $FLUSH -eq 1 && echo -ne "" > /tmp/inbuf_$1;
diff --git a/write b/write
index 030feb5..683a727 100755
--- a/write
+++ b/write
@@ -4,10 +4,10 @@
 ROOT=$(dirname `realpath $0`);
 
 # (1) Check arguments
-test $# -lt 2 && echo "ERR: Missing arguments (name, message)" && exit 1;
+test $# -lt 2 && echo "ERR: Missing arguments (id, message)" && exit 1;
 
 # (2) load configuration file
-test -f $ROOT/config/$1 && source $ROOT/config/$1 || ( echo "ERR: No such name" && exit 1 ) || exit 1;
+test -f /tmp/outbuf_$1 || ( echo "ERR: No such id" && exit 1 ) || exit 1;
 
 # (3) Write content to file
-echo -ne "$2" >> $BUF_OUT;
+echo -ne "$2" >> /tmp/outbuf_$1;